From rescue and recovery to adventuring into the unknown we have you covered...
 
Nothing ever needs to stand in the way of your recovery truck, lorry, pick-up, SUV/4x4.
Whether it be mud, sand or challenging terrain the Novawinch T-series vehicle-mounted electric winch promises to rise to the challenge.  
 
Introducing the T-series vehicle-mounted electric winch designed and developed to be easily mounted to your vehicle,
this winch promises to fit the aesthetics of your truck, 4x4 and lorry because we understand that you don't want a robust
eye soar slapped on the front of your pride and joy, wouldn't you agree?! 
 
The winch remains small and discreet yet mighty and powerful in performance, unrivalled and unchallenged this winch
will be there for you whenever called upon that we can guarantee.  

What sets the T-series vehicle-mounted winch apart from the rest?
 
​The Novawinch T-Series Vehicle Mounted Electric Winch will let nothing get in the way of your recovery truck, lorry, pick-up or SUV/4x4. With a stronger motor armature vs. the competition and higher quality gearing and electronics, the T-Series vehicle winch can connect via 12v or 24v supply. This premium off-road winch is well protected with IP67 water resistance, heavy-duty reliable construction, a 500A sealed contactor and a 3-stage planetary gear for added grunt. 

Available with optional extras

What is a straight line pull?

A straight line pull is the attachment from point A (Winch) to point B (Anchorage point) no twists, bends or angles at any point. 

Configurations of your winch... 

By ensuring there are no angles from connection point A to anchorage point B immensely reduces the strain and stress on the motor and 

reduces the potential of uneven winding on the drum of the winch, you should always check throughout the pull that the cable remains straight. 

A few examples below...

A pulley block can be added to your configuration to add the following benefits: increase load capacity, reduce stress and strain on winch and mechanisms! 

A key point to remember when using a pulley block is that the block itself should be rated to a minimum of 2x the winch pull line rating. 

From the winch to the first connection should always remain straight without any angles, twists or bends. 2nd line can have a slight angle (see fig. 1)